Purpose:
The ABS Menu is to setup the Auto Brake System. Basically, you can set it up to pulsate the brake signal like on a full size car.
How to access this menu:
The ABS is a menu within the Main Menu. To open in up, do the following
- Starting from the Home Screen
- Press enter-SHORT
- Scroll till ABS is lit up
- Press enter-SHORT
- This is the ABS menu
How to use this menu:
Within the ABS menu there is one parameter to adjust, the rate of pulses. Using the scroll wheel, choose between OFF, SLO (slow), NOR (normal), FAS (fast).
Press enter-LONG, enter-SHORT or END to exit the menu and return to the main menu. Press BACK to exit the menu and return to the home screen.
So to summarize :
- Use SCROLL to choose between OFF, SLO (slow), NOR (normal), FAS (fast).
- Use enter-LONG, enter-SHORT, END, or BACK to exit the menu.
Screen Indicators:
While the ABS Menu is open, the following should occur
- ABS in the top menu bar is lit up and "Channel: 2" on the left will be lit up
- While adjusting the speed parameter, the 3 character dot display will be blinking
Other Noteworthy information:
Nothing much to add.