Article will be finished at a later date. If you need clarification sooner please contact us.
- mixes 4WS, DIG, throttle brake cut-off (for boats with forward-only throttle), Multi-Position (to set arbitrary up to 8 positions), brake channel (to send brake side of throttle to extra channel) > choose menu EPOINT and press ENTER-long > menu EPOINT will blink > select one of mixes 4WS (4), DIG (d), brake cut-off (b), multi-position (P), brake channel (8) for mixes 4WS, DIG: > press ENTER and choose channel for this mix or OFF - for dual-ESC steering (boat, tank, ...) select DIG channel 1 and with steering D/R reduce required ESC travel (at 100% it will go to contra to allow steering at place) > press ENTER and set mix in range -100...0...100 % 0% is default and means both channels have same max steering/throttle 100% means 100% reduce on rear steering/throttle (eg. no steering) -100% means 100% reduce on front steering/throttle (eg. no steering) > for 4WS press ENTER and select crab (CR1) or no-crab (CR0) for Multi-Position: > there are 4 Multi-Positions identified by numbers 1..4, they have 8/6/4/4 positions > press ENTER and choose channel for this function or OFF - channel can be "D" also, which means map to DIG function > press ENTER and set channel value for first position > press ENTER and set channel value for second position or END > ... up to eight position for brake cut-off: > press ENTER and choose OFF or CUT for brake channel: > press ENTER and choose channel fro brake or OFF